Vertical Pulverizer price

According to the processing technology of ultrafine powder equipment that has been mastered for many years, people have thoroughly and thoroughly innovating the above problems. In the use of the traditional Raymond mill, it was found that when Raymond mill was used to process calcite like ore powder, there was a large amount of 10um ultrafine mineral powder in the 325 mesh ore powder. If it could be separated and expanded, the benefit would be greatly improved. For this reason, a large number of renovation were carried out on Raymond mill structure.

The traditional way of the main engine has been improved, and the main shaft and the plum blossom frame have been improved to stabilize the structure and make it run smoothly.

According to the processing technology of ultrafine powder equipment that has been mastered for many years, people have thoroughly and thoroughly innovating the above problems. In the use of the traditional Raymond mill, it was found that when Raymond mill was used to process calcite like ore powder, there was a large amount of 10um ultrafine mineral powder in the 325 mesh ore powder. If it could be separated and expanded, the benefit would be greatly improved.

For this reason, a large number of renovation were carried out on Raymond mill structure.

The traditional way of the main engine has been improved, and the main shaft and the plum blossom frame have been improved to stabilize the structure and make it run smoothly.

Using the new Raymond mill, the other non-metallic minerals such as stone, dolomite, talcum, old soil, barite, Jin Hongshi, fluorite and other non-metallic minerals are fine grinded. According to the practice test, the calcite with the feed size of 25mm is selected for grinding. When the fineness is adjusted to 1250 mesh (10um), the output can reach 450kg/h, and the input power only needs 23kw. to have a significantly higher price ratio than the traditional Raymond mill.