Hammer crusher is a crushing machine that directly crushers the material with a maximum particle size of 600mm-1800mm to 25mm or 25mm below.

Working principle

The main working part of the hammer crusher is a rotor with hammers (also called hammers). The rotor is made up of spindle, disc, pin and hammer. The motor drives the rotor to rotate at high speed in the crushing chamber. The material is fed from the upper feeding port to the machine, crushed by the impact, impact, shear and grinding of the hammer which is moving at high speed. In the lower part of the rotor, the material with sieve plate and the size of the smashing material is discharged through the sieve plate, and the coarse material larger than the size of the sieve is left on the sieve plate to continue to be hit and grind by the hammer, and finally through the sieve plate discharge machine.

Adopt the new working casting hammer, wear resistance and impact resistance.

We can adjust the size of the needs according to the requirements of the customer.

The body structure seal solves the problem of dust pollution and body ash leakage in the crushing workshop.

The overall design is beautiful in appearance, compact in structure, less in wearing parts and convenient in maintenance.

Hammer crusher is used to crush various hard and abrasive materials. The compressive strength of the material is not more than 100 Mpa, and the moisture content is less than 15%. It can be used to crush the materials such as coal, salt, chalk, gypsum, brick and limestone. It is also used for crushing wood, paper and other materials, such as fiber structure, elasticity and toughness, and recovery of asbestos, and the crushing of asbestos cement products. In addition, hammer crusher can also replace cone crusher in mineral processing line.